| |
PE1RRR > BPQ 20.08.22 21:22l 30 Lines 1007 Bytes #999 (0) @ WW
BID : 42571-PE1RRR
Read: GAST
Subj: re: BPQ Problem {ka3bvj}
Path: DB0FFL<OE5XBL<DB0RBS<DB0ERF<IZ3LSV<I0OJJ<LU4ECL<VK2RZ<W0ARP<N3HYM<
IV3BVK<PE1RRR
Sent: 220820/1857Z @:PE1RRR.#NBW.NLD.EURO #:42571 [Rijen] $:42571-PE1RRR
From: PE1RRR@PE1RRR.#NBW.NLD.EURO
To : BPQ@WW
Hi Dennis & all
Sounds like it might be a couple of things- you might have to ensure that
the axrecolver cache text file that is saved every few minutes is deleted
on each end, so both remote and local systems, then ensure the maps are
both correct with each others callsign on opposite sides of the link.
If you want to test your outbound linking from each node, both of you
could try adding the following, it should work immediately after the
first broadcast is heard (every 20 minutes for this one).
map PE1RRR-5 rrrnet.ehvairport.com udp 10093 B ; EU Chat Hub
If both nodes link successfully to this one but not between yourselves
then there is either a firewall issue (sounds unlikely),
a cache file that is putting the old callsign back in the table
associated with the same IP.
The text files to look for are in such format: axipcache1.cfg
Where "1" is the port number in BPQ for the AXIP port.
Let us know how you get on,
73
Red / pe1rrr
Lese vorherige Mail | Lese naechste Mail
| |
